Extena launches Pressure Pipe SLM® DCS – with continuous monitoring and a high strength protective sheath
Damage to water pipes is a problem for most pipeline owners and involves high repair costs. This type of damage also poses problems for individuals or companies who may lose their access to clean water. And there are additional costs caused by the loss of drinking water, which can increase significantly over time.
In order to quickly locate damage to a critical pipeline at an early stage and thereby minimise troubleshooting time, Extena is now launching Pressure Pipe SLM® DCS. This pipe gives you full control and automatically alerts you to any damage to a pipeline, with up to one metre accuracy. You can choose between continuous online damage control or performing a control at predetermined intervals.
PE 100 RC, conductive strips and a high strength sheath
Pressure Pipe SLM® DCS from Extena consists of a standard pipe made of PE100 RC equipped with conductive strips for the rapid detection of possible leaks. The pipe also has a high strength sheath for extra protection. This sheath has a thickness of 1–5 mm depending on pipe dimension. Compared to traditional PE material, the raw material PE 100 RC has about 17 times higher requirements for slow crack growth.
A monitoring device connected to the pipe issues an alarm even in the event of very minor pipe damage. The messages are then sent directly to the control centre or a mobile phone. The system can automatically shut down and reconnect any connected pump systems, thereby preventing water loss at an early stage.
Benefits and features
In order to quickly locate damage to a critical pipeline at an early stage and thereby minimise troubleshooting time, Extena is now launching Pressure Pipe SLM® DCS. This pipe gives you full control and automatically alerts you to any damage to a pipeline, with up to one metre accuracy. You can choose between continuous online damage control or performing a control at predetermined intervals.
PE 100 RC, conductive strips and a high strength sheath
Pressure Pipe SLM® DCS from Extena consists of a standard pipe made of PE100 RC equipped with conductive strips for the rapid detection of possible leaks. The pipe also has a high strength sheath for extra protection. This sheath has a thickness of 1–5 mm depending on pipe dimension. Compared to traditional PE material, the raw material PE 100 RC has about 17 times higher requirements for slow crack growth.
A monitoring device connected to the pipe issues an alarm even in the event of very minor pipe damage. The messages are then sent directly to the control centre or a mobile phone. The system can automatically shut down and reconnect any connected pump systems, thereby preventing water loss at an early stage.
Benefits and features
- Permanent or on-demand monitoring of a pipe system
- Increased pipeline safety thanks to continuous status updates
- Avoid water loss including consequential damage
- Automated operations such as shutting off a stretch of pipeline
- Fast detection and location of damage with 1 metre accuracy
- Extra protection provided by a high strength 1–5 mm sheath
- Check that no damage has occurred during installation
